Monday, November 1, 2010

Linksys Router Manual Configuration for cable connection

0 comments
Turn off the Modem, Router and computer.  Connect a Ethernet cable from the broadband modem to the netgear router and another ethernet cable from the netgear router to a computer.

Note : If you are not using a desktop then connect a laptop with a ethernet cable for the setup.

















Turn on the modem first and wait till the lights are stable. Then turn on the router and computer.  If your connection is dynamic usually just a power cycle will get the internet connection back.

If still the computer is not connect to the internet then follow the next step.


Open a Browser and in the Address box type 192.168.1.1






The Login window will prompt for the routers username and password. The default username is “admin” and the default password is “admin”.




















Under setup click Basic setup.  Select the connection type as Automatic Configuration - DHCP.  Select the Correct Time zone and Click Save settings.

Comments

0 comments to "Linksys Router Manual Configuration for cable connection"

Post a Comment

Advertisement

 

Copyright 2008 All Rights Reserved Revolution Two Church theme by Brian Gardner Converted into Blogger Template by Bloganol dot com