Configure Wireless Router with WEP Security - Netgear

Open a Browser and in the Address box type www.routerlogin.com or 192.168.1.1.

The Login window will prompt for the routers username and password. The default username is “admin” and the default password is “password”.

Click the wireless Settings under setup.  Setup a Name(SSID) for the wireless Network.  Do not change the channel and mode until you are experiencing problem with wireless connection.

Under Security Options Select WEP.
Select the authentication type as automatic and select the encryption strength.
If you select the encryption to 64bit then generated key length is 10 characters, and for 128bit its 26 characters.

Under passphrase type in a word and click Generate. The router will generate 4 different keys for you. Key 1 will you wep password. Click Apply to save the Changes.

If you wants to make you own password then clear everything from the key 1 box and type in your own wep key. For 64-bit WEP - Enter ten hexadecimal digits (any combination of 0-9, A-F). For 128-bit WEP - Enter twenty-six hexadecimal digits (any combination of 0-9, A-F).