Monday, March 21, 2011

OSI Layers

0 comments
The OSI, or Open System Interconnection, model defines a networking framework for implementing protocols in seven layers. A layer is a collection of similar functions that provide services to the layer above it and receives services from the layer below it. On each layer, an instance provides services to the instances at the layer above and requests service from the layer below. OSI reference model is now considered as a primary standard for internetworking and inter computing. Today many network communication protocols are based on the standards of OSI model.

The 7 layers of the OSI models can be divided into upper and lower layers.

Layer 7: Application Layer
The Application Layer is the OSI layer closest to the end user, which means that both the OSI application layer and the user interact directly with the software application. This is the layer that actually interacts with the operating system or application whenever the user perform network-related activities.  

Protocols: FTP, DNS, SNMP, SMTP, FINGER, TELNET, TFTP, BOOTP and SMB protocol are operated on the application layer.

Network Devices: Gateway network device is operated on the application layer.

 

Layer 6:Presentation Layer
Layer 6 takes the data provided by the Application layer and converts it into a standard format that the other layers can understand.

Network Devices: Gateway Redirector is operates on the presentation layer.

Layer 5: Session Layer
It establishes, manages and terminates the connections between the local and remote application


Protocols: The protocols that work on the session layer are NetBIOS, Mail Slots, Names Pipes, RPC
Network Devices: Gateway

Layer 4: Transport Layer

Protocols: These protocols work on the transport layer TCP, SPX, NETBIOS, ATP and NWLINK.
Network Devices: The Brouter, Gateway and Cable tester work on the transport layer.

Layer 3: Network Layer

Protocols: These protocols work on the network layer IP, ICMP, ARP, RIP, OSI, IPX and OSPF.
Network Devices: Network devices including Router, Brouter, Frame Relay device and ATM switch devices work on the network layer.

Layer 2:Data Link Layer

Protocols: Logical Link Control ,  Media Access Control
Network Devices: Bridge , Switch, ISDN Router, Intelligent Hub, NIC, Advanced Cable Tester

Layer 1: Physical Layer

Protocols: Protocols that work on the physical layer are ISDN, IEEE 802 and IEEE 802.2
Network Devices: Hubs, Repeaters, Oscilloscope and Amplifier works on the network devices.

Sunday, March 20, 2011

0 comments























Configure Guest network on dual band router - Netgear router

0 comments
Open a Browser and in the Address box type www.routerlogin.com or 192.168.1.1







The Login window will prompt for the routers username and password. The default username is “admin” and the default password is “password”




















Click Guest network b/g/n to configure the 2.4ghz wireless guest network
Check Enable Guest network to enable the feature
Check Enable SSID Broadcast to broadcast the network name
Check Allow guest network to share your network with other users
Check Enable Wireless isolation to isolate the Guest network from reset of the network























Click Guest network a/n to configure the 5ghz wireless guest network
Check Enable Guest network to enable the feature
Check Enable SSID Broadcast to broadcast the network name
Check Enable Video network if you will be streaming HD video
Check Allow guest network to share your network with other users
Check Enable Wireless isolation to isolate the Guest network from reset of the network

Configure Guest network - Netgear Router

0 comments
Open a Browser and in the Address box type www.routerlogin.com or 192.168.1.1







The Login window will prompt for the routers username and password. The default username is “admin” and the default password is “password”



















Click Guest Network.
Check Enable Guest Network to enable the feature on the router
Check Enable ssid Broadcast to broadcase you network name
Check Allow guest to access my local network to all the users to share your network with everyone.
Setup a SSID and configure the wireless security.

Thursday, March 17, 2011

Windows 7 Disk Cleanup

0 comments
  1. Click the Start button and type Cleanup in the search box, then click 'Disk Cleanup' in the search results.
  2. Disk Cleanup will run a quick scan of your hard drive to identify files that can be safely removed.

































  1. Tick the box next to the sections you'd like to clear up.
  2. Click 'OK' and follow the on-screen instructions to clean your hard drive.

Windows 7 Disk Defragmentation

1 comments
Disk Defragmentation increases the performance of your computer.
Click “Start>All program>Accessories>System tools>Disk Defragmenter” to run disk defragmenter































Click One by one and click Disk Defragment.
If you want windows to automatically do the defragmentation click configure schedule.

Change Windows update settings

0 comments
click on Start>Control Panel>System and Security>Windows Update.
Click Change Settings which is on the left side of the screen.






















 Change the Windows update settings.


Personalize Windows 7

0 comments
Change Screen Resolution
Change Windows update Settings

change your screen resolution

0 comments
  1. Open Screen Resolution by clicking the Start button , clicking Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.




















     
  2. Click the drop-down list next to Resolution, move the slider to the resolution you want, and then click Apply.


































  3. Click Keep to use the new resolution, or click Revert to go back to the previous resolution.

Windows XP - No wireless networks found in range

0 comments
If you get this message no network found in range on a laptop and if the computer got a built in wireless card, then the wireless switch on the computer is off.



























If computer got a External adaper then try the following steps
1. disable and enable wlan
2. unplug and replug the adapter
3. reinstall the wireless adapter
4. try change the wireless settings on the router
5. take the laptop to any hot spot and check whether its finding any signal

windows XP - Validating identity

0 comments
When you try connecting to the wireless network it says "validating identity"



























and at the bottom of the system tray it says "windows was unable to find a certificate to log you on to the network"










This problem occurs when you have a enabled wep security on the router.
To Resolve the issue click Change Advance settings on the left of the screen.
Click the Wireless Networks tab. Select the wireless networks tab and click properties.




























Under association uncheck The key is provided form me automatically and enter the network key and confirm network key. Click Ok.




























Again select the network and click properties.
Go to the Authentication tab and uncheck Enable IEEE 802.1x. Then click OK.




























The wireless connection will get connected automatically.

windows cannot configure - Click Change Advance Settings

0 comments
" windows cannot configure the wireless connection ............Click change advance settings...............".
If you get this error message then click change advance settings on the left side of the screen.





























Click the wireless networks Tab and click the Check box " Use windows to configure my wireless connection setttings". Click Ok and then search for the wireless connection

Windows Cannot configure - Enable Wireless Zero configuration

0 comments
When you get this message " Windows Cannot configure the wireless connection .................. If you want windows to configure this wireless connection. Start Wireless Zero Configuration ( WZC ) service.........." Enable wireless zero configuration service.





























To Start the Wireless zero configuration click Start > Run > Services.msc and start the wireless zero configuration service. To view the screen shot on how to enable WZC click Here.

Monday, March 7, 2011

Enable Wireless Zero configuration

0 comments
Click Start > Run
Type services.msc















Right Click Wireless Zero Configuration and select properties




































Select the Startup type as automatic and services status to started.

Remove Preferred Networks - windows xp

0 comments
Start > Control Panel > Network Connection
Right Click Wireless Network connection and Select Properties























Select the Wireless Network and Click Remove

Windows XP

0 comments
Wireless :
Connect to a wireless network
Manually Add Wireless Network
Remove Preffered Wireless Network
Enable Wireless Zero Configuration

 Troubleshooting :
Windows cannot configure - Enable WZC
Windows cannot configure - Click change advance settings
Windows XP - Validating Identity
No wireless network found in range

Manually Add wireless Network - Windows XP

0 comments
Start > Control Panel > Network Connection
Right Click Wireless Network connection and Select Properties






















Click the Wireless Network Tab and Click Add































Enter the Name SSID, Select the security options and enter the network key. Click OK to add the network.






























The Network will be add to the preffered network list. Click OK to connect to the network.

Connect to a wireless network - windows XP

0 comments
Click Start > Control Panel > Network Connection
Right Click Wireless Network connection and Select View Available Wireless Networks




















Select the Wireless Network and click Connect



























Enter Network Key and configure the network key, then click connect.

Setting Save does not match the Requirement

0 comments
When you Tried Connecting to the wireless network you get a message " The settings save on this computer for the network does not match the requirement of the network".

















To Resolve this problem you need to remove the preffered network and then connect to the wireless network.

Click Open network and Sharing center. On the Left side of the screen Click Manage Wireless Network
















Right Click the network and click remove network
























After removing the network go to connect to a network and try connecting to the wireless network.

Enter Additional Logon Information

0 comments
When you tried connecting to the wireless network it prompts you for additional log on information. You get this message when wep security is enabled on the Wireless Router.






















To Resole the problem you need to manually add the wireless network.

Click Start and Select Control Panel


















Click on Network and Internet connection





Click Network and sharing center
On the Left side of the screen Click Manage Wireless Network
















Click Add
























Select Manually Create a Network Profile






















Type the Wireless Network Name, password and click Next
























Show successfully Added the Network. Click Close.



















Windows will take some time to identify the network. Once the network is connected it asks you select the location. If the network is not connected then try restarting the computer.

Advertisement

 

Copyright 2008 All Rights Reserved Revolution Two Church theme by Brian Gardner Converted into Blogger Template by Bloganol dot com